Bloom Lamp — Radial Fin Accent Light, Cordless 16-Color RGB with Remote

Curved fins opening like petals, lit from inside, and no cable anywhere.

The shade is built from a ring of sweeping fins that radiate out and up, so the light escapes in the gaps between them and throws a fan of soft shadow across whatever it's standing on. From above it reads as a flower; from the side, as a piece of modern sculpture. It holds that presence with the light off, which is more than most lamps manage.

The upper section is printed in a translucent finish so the fins glow through rather than block the light, and the whole form stays legible from every angle instead of having a good side and a back.

Inside sits a cordless RGBW puck with a remote — sixteen colors plus warm white, changed from across the room. Because nothing plugs in, the lamp goes where a lamp normally can't: the middle of a dining table, a shelf with no outlet behind it, a mantel, a bathroom counter, the far side of a nightstand. Pick it up, move it, set it down.

Warm white for reading, deep blue for evening, or leave it cycling for a party. Same lamp, different room.

Printed in two parts on a Bambu Lab P2S in our studio in Lewisville, Texas, then assembled by hand.

Details

Size — measured per print, see note
Light — cordless 16-color RGBW puck with remote, included and fitted
Material — translucent PETG upper, PLA base
Power — rechargeable, no cable in use
Assembly — none, arrives built
Care — dust with a dry, soft brush, working along the fins rather than across them. Don't use liquid on the shade.
Note — decorative accent lighting, for indoor use only. LED only, no heat-producing bulbs. Keep away from water, and don't cover the shade with fabric.
Base — At this moment the base will be black and will eventually add more colors.

Made one at a time, after you order it.